20
139894 GF 160 DV IPI 12/17
11. Accessories
Firebox Panel Kit
Skamol Firebox Liner Kit 158046
Black Reflective Glass Panel Kit 157965
This procedure applies to both kits.
ORIENT GLASS PANELS WITH THE
SMOOTH SIDE FACING OUT.
1. Set the Rear Panel, bottom first, behind the pilot
assembly shield and resting on the rear shelf. When
installed, the two side panels will hold the rear in place.
2. The side panels rest on the shelves at each side of the
burner. Each panel is secured by a single
Retainer Tab
located within the upper corner of the firebox ceiling.
Set a panel in place against the firebox wall and use a
flat head screwdriver to pry the retainer tab down just
enough to hold the panel snug in place.
3. Repeat with the other side panel.
INSTALL FUEL OR HIGH ALTITUDE CONVERSION
KITS BEFORE INSTALLING PANEL KITS.
Reflective Black Glass Contents:
• Rear Panel .................. 226073
• Left Side Panel ...........226074
• Right Side Panel ........ 226075
• Cotton Gloves, 2
Skamol Panel Contents:
• Rear Panel ..................226029
• Side Panels, 2 ..............226030
THE PANELS ARE FRAGILE.
SUPPORT EACH WITH BOTH HANDS.
HANDLE THE GLASS PANELS WITH THE COTTON GLOVES
PROVIDED TO MINIMIZE FINGERPRINTS. SKIN OILS ARE
DIFFICULT TO REMOVE FROM THE GLASS SURFACE.
Tools:
• Flat head screw driver
Retainer Tab
Pilot Assembly Shield
Figure 11.1. Install Rear Panel.
Figure 11.2. Install Side panels.