29
ENGLISH
Fig. 16
A
B
• Secure the Jøtul JGFW-5 firewall into position
(Fig. 16A)
with
four screws
(Fig. 16B)
.
Note: Screws cannot be used if the
product is to stand against a firewall. The board must then
be glued into place.
Fig. 17 - 1
A
• The
top
(A)
of the outer heat shield must be removed. Cut
along the knock-out holes
(Fig. 9 in the main manual for the
Jøtul I
520
)
.
Fig. 17 - 2
A
B
• Adjust the levelling screws
(Fig. 13; 14; 15; 16; 17; 18; 22; 23; 24;
25 and 26 in the main manual for the Jøtul I
520
)
.
•
Unscrew the rear levelling screws
(Fig. 17A)
to their maximum
length (this makes it easier to position the insert in the
surround).
NB:
When the insert is in its place, screw the
levelling screws back again.
• The outside air connection
(Fig. 17B)
must be moved from the
rear to the bottom (See the main manual for the Jøtul I
520
Fig. 3 and 4).
• The internal heat shield must be removed
(Fig. 6 to Fig. 8 in
the main manual for the Jøtul I
520
).
NB: Do not install the parts until the Jøtul I
520
has been
placed inside the surround
Fig. 18A
• Lift the burnchamber into place in the surround.
•
Insert a piece of cardboard, wood or other sheet of protective
material to prevent damage to the soapstone.
