28
Fig. 12
• Attach and secure the soapstone to the other side of the
frame (see
Fig. 10 and Fig. 11
).
Fig. 13
A
B
B
• Secure the Jøtul JGFW-5 firewall into position
(Fig. 13A)
with
four screws
(Fig. 13B). Note: Screws cannot be used if the
product is to stand against a firewall. The board must then
be glued into place.
Fig.14
A
A
A
A
B
•
Insert the screws in the front panels of the soapstone
Fig. 15
B
C
A
• Secure the soapstone fronts
(Fig. 15A)
to the frame with
brackets
(Fig. 15 B/C).
•
Make sure the soapstone fronts is leveled and that it visually
looks correct. If the front panel is too low in relation to the side
panels, this must be corrected by adding a washer between
the front panel and the floor.
ENGLISH
