2
Table of contents
1.0 Regulatory information .............................. 2
2.0 Technical data .......................................... 2
3.0 Safety
........................................................ 6
4.0 Installation ................................................ 6
5.0 Daily use ................................................. 14
6.0 Servicing ................................................. 15
7.0 Maintenance
............................................ 16
8.0 Optional Equipment ................................ 16
9.0 Recycling
................................................. 17
10.0 Warranty
.................................................. 17
On all our products there is a label
indicating the serial number and
year. Write this number in the
place indicated in the installation
instructions.
Always quote this serial number when
contacting your retailer or Jøtul.
les combustibles recommandés.
Respectez les consignes d'utilisation. Utilisez uniquement
Verwenden Sie nur empfohlenen Brennstoffen.
Montage- und Bedienungsanleitung beachten.
Follow user`s instructions. Use only recommended fuels.
standard
Certificate/
The appliance can be used in a shared flue.
Minimum distance to adjacent combustible materials:
Emission of CO in combustion products
Lot no: Y-xxxx, Year: 200x
Manufacturer:
N-1602 Fredrikstad
Norway
Jøtul AS
POB 1441
Sweden
EUR
Intermittent
Nominal heat output
Norway
Country
Operational type
Fuel type
Operation range
Efficiency
Klasse II
Classification
Standard
Flue gas temperature
Room heater fired by solid fuel
Product:
Jøtul
SP Sveriges Provnings- och
221546
Forskningsinstitut AB
SP Swedish National
Testing and Research
Institute
:
Approved by
:
:
:
:
:
:
:
Minimum distance to adjacent combustible materials:
OGC
SP
EN
Lot no. Pin.
1.0 Regulatory information
Installation of a
fi
replace must be according to local codes and
regulations in each country.
All local regulations, including those that refer to national and
European standards, shall be complied with when installing
the product.
The installation can only be taken into use after it has been
checked by a quali
fi
ed inspector.
An approval label made of heat resistant material is located
on the heat shield at the back of the product. This contains
information about identi
fi
cation and documentation for the
product.
2.0 Technical data
Material:
Cast iron
Finish:
Black paint
Type of fuel:
Wood
Max. log length:
50 cm
Smoke outlet:
Top
Flue pipe dimension:
Ø 150 mm
Outside air connector:
Flexible aluminium pipe
Ø80 mm/Ø100 mm
Weight:
Approx. 172 kg
Optional extras:
Frame wide, Fan, Outside
air connection kit Ø 100
mm.
Product dimensions, distances:
See
Fig. 1
Technical data in accordance with 13229:
Nominal heat output:
9.0 kW
Flue gas
fl
ow
rate: 6.5
g/s
Recommended chimney draught: 12 Pa
E
ffi
ciency:
85.3%@9.0 kW
CO emissions (13% O2):
0.06%
OGC emissions (13% O2)
48 mg/Nm3
Dust
emissions
11
mg/Nm3
Flue gas temperature:
213°C
Operation:
Intermittent
Intermittent operation means normal use of a
fi
replace. This
means that to refuel the
fi
re, you add more wood as soon as
the previous load of wood has burned down to embers.
ENGLISH
