82695
_Op&Ins MAN_TR2600_K
3-1
3
TR-2600 AIS BASE STATION CONFIGURATIONS
AIS BS can be used in several configurations in a base station according to standards specified in
paragraph 1.4.
The AIS BS can be a part of a PSS (Physical AIS Shore Station) , which can in its most basic
configurations look like the examples in this chapter. RS422/RS232 or Lan (10baseT) are the
interfaces used for remote control/data exchange with the TR-2600 transponder. Dependent of the
supplier of BSC, systems can be built up in different ways, and below are some examples:
3.1
Using RS422/RS232 interface
When using this port, every TR-2600 needs it’s own BSC to connect and control the data flow. The
BSC can be connected to a network and be a part of AIS BS system. See below.
In this configuration, every BSC controls only one TR-2600 and to be a part of an AIS shore station
network, it is also required LSS (Logical Shore Station) and ASM (AIS Service Management).
Site #1
Site #2
Figure 3.1, Using RS422/RS232 interface
In this configuration, communication between the TR-2600 transponder and the BSC is through the
RS422/ RS232 interface communicating on 38400 bits/second (baud).
AIS BS
VHF & GPS Antenna
Base Station
Controller
(BSC)
Network (LAN/WAN)
RS-232 or RS-422
Base Station
Controller
(BSC)
RS-232 or RS-422
AIS BS
VHF & GPS Antenna
To other BSC
controllers to be a
complete BSC
network
Protection
and filters
Protection
and filters
Summary of Contents for TR-2600
