“ow place the lid on top of the liquid container so
the print is submerged in isopropyl alcohol. This is the
recommended procedure, because both the platform and
the object are washed. If the object is too large for the
tank, remove it from the platform and wash it twice - Jrst
in >normal> orientation, then rotate it upside down and
wash it again.
Select Start washing on the display and the machine
will wash the object for 3ZZ minutesZZ (default value).
…ou can change the washing time by either rotating
the knob during the process or by selecting Run-time
option before the print. We do not recommend washing
objects in isopropyl alcohol for more than 10 minutes -
tiny cracks may appear on the surface of printed objects
(even after more than 24 hours), which is the result of a
long exposure to IPA.
If you print a very tall object (e.g. maximum print volume of the SX1), it’s possible the object will
collide with the propeller at the bottom of the tank. Consider detaching the object from the
printing platform and washing it using the metal basket. Wash the printing platform separately.
Washing small objects / objects removed from the printing platform
After a print Jnishes, open the lid of the SX1 and place a protective tray around the resin tank. Use
a plastic spatula or paper towels to clean the top of the printing platform. Release the black knob
and remove the printing platform - wear gloves!
12
