•
Place the machine in a horizontally stable position - the best place is a workbench. A good
practice is to put a plastic tablecloth under the machine in case a resin / IPA spill occurs.
To ensure safe and optimal work experience, the CW1 should to be placed in a location that meets
the following conditions:
•
The external power supply should be placed in such a manner that will prevent anyone from
tripping over the cable, or damaging it.
•
Do not place the device next to a source of water or into a wet environment
4.2 Starting the device
Connect the external power supply to the CW1 and plug it into the power source. To disconnect
the cable, push the connector’s cover away from the CW1 to unlock the connector, then pull it out.
Turn the device on by using the mechanical switch next to the power supply connector.
Connecting the power supply unit and turning on the machine
Once you turn the CW1 on, the display in the front will light up. The knob next to the display is the
main control device. Rotate it left or right to select items on the screen and push it to conJrm the
selection / change options.
4.3 Preparing the liquid container
Kefore you start the washing process, you need to prepare the isopropyl alcohol bath.
Prepare the stainless steel tank and the magnetic propeller. Place the magnetic propeller into the
tank so it lays "at on the bottom. Klades must point upwards.
10
