JOOLCA HOTTAP – MODEL JCA11001 USER GUIDE
5
FIGURE B2
– Outdoor Area Example 3. With both
ends open.
C) Within a partial enclosure that includes an
overhead cover and more than two walls, the
following shall apply:
FIGURE C1
– Outdoor Area Example 4. With the open side
at least 25% of the total wall area and 30% or more in
total of remaining wall area is open and unrestricted.
FIGURE C2
– Outdoor Area Example 5. With the
open side at least 25% of the total wall area and
30% or more in total of the remaining wall area is
open and unrestricted.
SAFETY FEATURES
This appliance is equipped with the following
safety features:
Over temperature sensor –
The appliance will
not allow the burner to remain in operation
once the outlet water temperature reaches
50°C. To relight the burner you will need to
turn the water flow off and back on.
Water flow sensor –
Water must be flowing
through the system to allow the burner to
ignite. In the case that the water supply is
restricted or ceases, for example if you close
the water flow at the shower nozzle, the burner
will be extinguished and will not relight until
the water flow recommences.
HANGING THE APLIANCE
Outdoor use only -
The appliance must be
used outdoors only and is to be operated no
closer than 500mm from the sides and
1000mm from above to all combustible
surfaces, fabrics, flammable materials and
people.
The appliance is designed to be hug upright
against a non-combustible vertical surface. Do
not operate from a non-upright position doing
so can be dangerous and will damage the
appliance.
During operation ensure that both air inlets
and the top exhaust are kept free from
obstructions and closure.
