Jonix maximate, Use And Maintenance Manual

Page: 29 / 44

29
JO NIX
maximate
14
15
16
230 VOLT
03
7.3.1 Replacing the ionising tubes
Replace the ionising tubes every time it is notified on the display.
Fig. 13: Switch off the unit by turning the
On / Off switch to the 0 position.
Remove the plug connected to the mains.
Fig. 14: Open with the handle the front
doors. Remove the top panel to access the
ionising tubes.
Fig. 15: Gently unscrew the tubes, using
the green plastic base. If you have trouble,
first pull off the outer mesh.
Fig. 16: Pull off the outer mesh from the
tube if you have not already done so in the
previous point.
If this is difficult to do, turn the mesh around
the glass while pulling to remove it.
Gently remove the end of the
tube from its seat being careful
not to damage it.