Jonix maximate, Use And Maintenance Manual

Page: 12 / 44

12
JO NIX
maximate
• Worn or damaged parts must only be repaired or replaced by qualified staff and by following
the instructions given in this manual.
• The spare parts must be approved by the Manufacturer.
• In the event of decommissioning or disposing of the device, follow the
anti-pollution regulations set out by the country in which the device is installed.
• Do not pour water or any kind of liquids on the device.
• Place the device so that the power cable cannot be stepped on.
• Do not connect the device to power lines connected to any other electric utilities or devices.
• Use the type of power supply shown on the label. If you are not sure about the type of
power supply available, ask your local retailer or electricity provider for assistance.
• Do not touch the inside of the device, unless specified otherwise in the instructions contained
in this manual.
• Never force the components when assembling: although it is made with high strength
materials, the parts of the device can be damaged if handled incorrectly.
• Do not try to perform maintenance work on the device, except where specified in this manual.
Opening or removing the outer casing may expose you to dangerous live parts or may involve
other risks. All maintenance work must be carried out by authorised staff, except where
specified in this manual.
• Unplug the device from the mains and contact qualified staff for assistance in one of the
following cases:
- The device has come into contact with water or liquids of any kind.
- The device has been exposed to the elements.
- A malfunction persists despite all the installation and/or maintenance procedures have been
performed properly.
IMPORTANT The installer and the user, when using the JO NIX
maximate
device,
must take into account and solve all the other types of risk associated with the
system. For example, risks arising from foreign bodies getting into the device or
risks due to dangerous flammable or toxic gases at high temperature.
6.2 GETTING STARTED
• Check that the various components of the device are fully intact.
• Check that the documentation and any accessories for installation are contained in
the package.
• Carry the device in its packaging as close as possible to the installation site.
• Do not rest weights or tools on the device, or place it on an unstable surface.