Jonix maximate, Use And Maintenance Manual

Page: 26 / 44

26
JO NIX
maximate
07
08
09
MIN
3 mm
10
Fig. 07: Clean the glass using a damp
cloth.
Do not use liquid cleaners or
sprays, soap or the like.
Check that the tube is in good conditions: there must not be any cracks or other
damage; otherwise it must be replaced. As soon as you notice a whitish layer on the
perforated metal plate inside the glass it means that the ionising tube needs replacing.
The tubes must usually be replaced within 18 months of use.
Fig. 08: Wash the mesh under running hot
water and dry it thoroughly with a cloth.
Fig. 09: Put the outer metal mesh back on
the glass tube so that it fully overlaps the
internal plate.
In any case ensure a minimum
distance of at least 3 mm from
the base of the tube.
Do not put back the mesh on
the ionising tube if it is even
partially wet.
Fig. 10: Gently screw the ionising tube
holding on to the base (green part).
ATTENTION: do not overtighten
the screw after reaching its end
stop.