Jonix maximate, Use And Maintenance Manual

Page: 28 / 44

28
JO NIX
maximate
Make sure the condensers work properly: you must be able to hear a slight hissing.
Check that the device responds to commands.
Should a malfunction persist, unplug the device from the mains and contact qualified
staff.
Failure to clean the ionising tubes when indicated by the device leads to a drop in
system performance.
Clean the outside of the device with a damp cloth.
7.2.2 External cleaning of the equipment
Do not use liquid cleaners or sprays, soap or the like.
Reset the alarm launched by the device in the alarm screen:
The components of the device subject to time deterioration hence they need to be replaced are:
- - ionising tubes: when signs of wear appear, it is necessary to replace the component. They
are evident with the appearance of oxide in the condenser internal mesh that will make it
whitish, and that will render the glass opaque. The device will signal the need of replacement
of the component after 14000 hours of operation.
- filters: the components have the function of barrier, and they tend to saturate so that eventually
they will obstruct the air flow. The detection devices internal to
JO NIX
maximate
signal how
necessary is an operation of replacement in order to maintain a smooth functioning of the
device.
7.3 SPECIAL MAINTENANCE
JO NIX
maximate
JO NIX
maximate