Jonix duct 70MIC2C, Use And Maintenance Manual

Page: 17 / 32

17
JO NIX
duct
CONFIGURATION
Baud Rate 4800
World Lenght 8
Parity NONE
Stop Bits 1
N° VARIABLE DEFINITION UNITY NOTES TYPE
7 Threshold MIN voltage cV - Lecture
8 Alarm MIN voltage generators -
0: not active
1: active (type 0 to reset) Lecture /
Scripture
9 Threshold MAX voltage generators cV - Lecture
10 Alarm MAX voltage generators -
0: not active
1: active type 0 to reset) Lecture /
Scripture
11 Count hours maintenance Hours - Lecture
12
Threshold count hours alarm maintenance
(selectable with jumper CN1.3-4)
Hours If 0 the control is not active
Lecture /
Scripture
13 Alarm count hours maintenance -
0: not active
1: active (type 0 to reset) Lecture /
Scripture
14 Count hours replacement Hours - Lecture
15 Threshold count hours alarm replacement Hours If 0 the control is not active
Lecture /
Scripture
16 Count hours alarm maintenance -
0: not active
1: active (type 0 to reset) Lecture /
Scripture
17
Pilotage rating Modbus
On/Off
-
0: not enabled
1: enabled Lecture /
Scripture
18 Pilotage Modbus On/Off -
0: not active ionisation
1: active ionisation Lecture /
Scripture
19 Manual threshold for MAX voltage alarm generators cV -
Lecture /
Scripture
20
Threshold count hours alarm maintenance
(selectable with jumper CN1.4-5)
Hours If 0 the control is not active
Lecture /
Scripture
21 IN2 enabling for generators activation -
0: not enabled
1: enabled Lecture /
Scripture
22 IN1 state -
0: contact open
1: contact closed
Lecture
23 IN2 state -
0: contact open
1: contact closed
Lecture
24 Current state of generators -
0: off
1: on
Lecture
25 Percentage count hours maintenance - Count hours / active threshold Lecture
26 Percentage count hours replacement - Count hours / active threshold Lecture
27 Reset count hours maintenance - Write 1 to reset count hours
Lecture /
Scripture
28 Reset count hours replacement - Write 1 to reset count hours
Lecture /
Scripture
29 Minimum voltage alarm activation -
0: not enabled
1: enabled Lecture /
Scripture
30 Maximum voltage alarm activation -
0: not enabled
1: enabled Lecture /
Scripture
The device is controllable and monitorable by
using the only serial line.