Jonix duct 70MIC2C, Use And Maintenance Manual

Page: 18 / 32

18
JO NIX
duct
7.1 WARNINGS
7 - MAINTENANCE
BEFORE CARRYING OUT ANY MAINTENANCE OPERATION MAKE SURE THAT THE
DEVICE IS NOT AND CANNOT ACCIDENTALLY BE POWERED ELECTRICALLY.
YOU MUST THEREFORE UNPLUG THE DEVICE BEFORE CARRYING OUT ANY
MAINTENANCE.
• It is the duty of the user to perform all the maintenance operations on the device listed below.
• If you experience a malfunction, unplug the device from the mains and contact qualified staff
(retailer, the Manufacturer).
• Only trained and qualified personnel can perform maintenance operations.
Use work gloves to protect your hands when performing maintenance.
The JO NIX
duct
device requires a small amount of maintenance consisting in regularly cleaning
the glass and outside mesh of the condenser.
The device signals the need for maintenance of the generators, by means of a special alarm
contact, every 7000 hours of operation.
7.2 ROUTINE MAINTENANCE
The frequency of the operations to be performed to ensure proper maintenance of the device
JO NIX
duct
depends mainly on the quality of the treated air.
Air can be especially harmful for condensers when it contains polluting or aggressive substances
such as:
- Industrial flue gas
- Sale
- Chemical smoke
- Heavy powders
By coming into contact with the inside or outer surfaces of the device by means of
the air flow or by direct exposure, these substances can lead to a structural and
functional failure of the device and of its performance as time passes and without
proper, systematic maintenance.