10
When you close the door, the lock tongue did not come out or only
part of it, we normally call it "fake locking". In this case, the lock will
alarm and flashing blue light. The alarm stops until you re-lock it.
6. Stay- open (channel) setting
6.1 Stay-open settings:
Press rear
handle to make the bolt back in and don’t move. Read an
unlocking card or put in unlocking password, the buzzer sounds a
long ”beep”, the blue light flashing once, the motor rotate to open the
door, the door is in stay-open status. (channel status).
6.2 Remove the channel status:
Press rear handle to make the bolt back in and don’t move. Read an
unlocking card or put in unlocking password, the buzzer sounds a
long ”beep”, the blue light flashing once, the motor rotate to open the
door, the door closed(the stay-open status removed). Or read the
management card or put in the management password directly to
remove the channel status.
Password functions and operating instructions
⑴
Management password:
Function: setting and clearing the valid passwords and unlocking the lock.
⑵
Unlocking passwords:
Function: open the lock.
1. Change the management password:
1.1 Put in the original 8-bit password and press unlock key(12345678), the
motor will rotate with blue lights flashing. Press “1”, you will hear one long
sound with blue lights flashing moderato. Then put in the new password
and press unlock key, you will hear one long sound and see blue lights
flashing fast. Put in the first password again to confirm and press unlock
key. Blue lights on, the buzzer "beep, beep, beep" long for three times
mean the management password is changed successful. If you put in the
password error on the second times, after buzzer sound "tick, tick, tick, tick,
tick" 5 times then re-
enter password. Press “ *” key to exit.
2. Setting unlocking password:
