7
1. Stand-alone (independent): Mifare card or password alone to open the
door.
2. Combined: Mifare card and password are used together to open the
door.
Note:
1
. The system locks Initialized from the factory, the first management
password is 12345678, unlock method is stand-alone model.
1.1 Change Stand-alone model to the combined model:
Enter 8-bit management password
，
press key button and then press “6
“button, buzzer 6 sounds, blue light flashing, then press key button to
confirm, the buzzer "beep "long, you have change the model successfully. If
you want to exit, press the“*“button;
1.2 Change combined model to the Stand-alone model:
Put in 8-
bit management passwords, then press “5 “button , buzzer 5
sounds, blue light flashing, then press the key button to confirm, the buzzer
"beep "long, you have change it successfully. If you want to exit, press the *
button;
2.
In combination mode, if swipe the card first(or enter a password before
pressing the key button) there would be sounds of "di di", blue lights
flashing.Then put in the password and press the key button (or swipe the
card) in 10 seconds, blue light on and the door unlocked.
Mifare Card Operation Manual:
⑴
Management Card
Function: setting and clear the effective unlocking card; unlock the
door.
⑵
Unlocking card
Function: unlocking the door and set the stay-open state.
⑶
Mechanical key
Function: emergency unlocking the door, setting and managing the
management card.
