Jolimark FP-8800K, User Manual

Page: 8 / 48

Chapter 1 Setting up the printer
1 - 2 Chapter 1 Setting up the printer
• Connecting the printer to the power source
•
Make sure that the power switch is set to off. Connect
the printer with the supplied power cord to an AC outlet
Caution
Connect the AC power plug to an AC outlet of the voltage
designated on the rating plate on the back of the printer
• Connecting the printer to the computer
1.
Parallel interface
Make sure that the power switch is turned to off.
Connect the signal cable to the printer and the
computer.
2.
Serial interface
Make sure that the power
switch is turned to off.
Connect the signal cable to
the printer and the computer.
Once the printer
is turned off, wait
for three seconds
or more before turning it on again.
If the printer is turned on again
within three seconds after turning
it off, it may malfunction due to an
initialization failure.
Note
• The AC outlet shall be installed near the printer and shall
be easily accessible.