Jolimark FP-8800K, User Manual

Page: 34 / 48

Chapter 2 Control panel operation
Chapter 2 Control panel operation 2- 7
• Head adjustment lever
This lever is for adjusting the gap between the print head and the paper.
The lever position should be at "AUTO " normally, which adjusts the gap in accordance with the
SETUP MODE. When " AUTO " is selected on the panel, the printer measures the paper
thickness and adjusts the gap between the print head and the paper automatically.
In case that the graduation 1 - 7 is selected, the gap between print head and paper is fixed.
Best position can be selected manually to meet the paper thickness as follows;
Graduation 1 for 1 sheet form.
Graduation 7 for 7 sheets multipart form.
• Key shortcut functions
Key shortcut functions are executed by pressing and holding the corresponding keys while
simultaneously turning on the printer power. The following table shows the available shortcut
functions.