Chapter 2 Control panel operation
2 - 4 Chapter 2 Control panel operation
9. EJECT/LOAD
●
If the EJECT/LOAD key is pressed when fanfold paper is loaded,
the paper is fed back to the parking position. When it is pressed
when a cut sheet paper is loaded, the paper is ejected.
●
When the EJECT/LOAD key is pressed when fanfold paper is at
the parking position, the paper is loaded to the TOF position.
●
When the EJECT/LOAD key is pressed with no paper in the
manual mode, the key is ignored. When it is pressed with paper
loaded in the manual mode, the printer ejects the paper.
●
When the EJECT/LOAD key is pressed with no paper in the CSF
mode, the printer loads paper. When it is pressed with paper
loaded in the CSF mode, the printer ejects the paper.
10. LF/FF
Press the LF/FF key to feed the line in the forward direction at a
pitch of 1/6 inch. Keep the key depressed to feed the page at the
currently set page length.
11. MICRO LF (ALT + LF/FF keys)
Press the MICRO LF key to feed the line in the forward direction
at a pitch of 1/360 inch.
Use this key to adjust the paper position.
12. RLF
Press the RLF key to feed the line in the reverse direction at a pitch
of 1/6 inch.
Keep the key depressed for continuous reverse line feeding.
13. MICRO RLF (ALT + RLF keys)
Press the MICRO RLF key to feed the line in the reverse direction
at a pitch of 1/360 inch.
Use this key to adjust the paper position.
Summary of Contents for FP-8800K
Page 1: ...24 pin Dot matrix Printer FP 8800K USER S MANUAL JOLIMARK...
Page 3: ...USER S MANUAL KongYue Electronics Information Industry XinHui Ltd FP 8800K...
Page 37: ...Chapter 3 Setup options 3 3 Chapter 3 Setup options Function of the setup modes...
Page 38: ...Chapter 3 Setup options Chapter 3 Setup options 3 4...
