Jolimark FP-8800K, User Manual

Page: 6 / 48

i
Safety Cautions
z
Use two hands and hold firmly at each
end when lifting the cut sheet feeder.
Personal injury can occur if the CSF
unit is dropped.
z Do not put your finger on the tractor
gear, when using the rear tractor.
z
Do not touch the print head immediately
after printing because it is too hot.
z
Do not put your finger under the tractor
cover while loading fanfold paper.
Cautions in setting up
z
Place the printer on a rigid, horizontal
base in a location that is free of
vibration.
z
Before connecting or disconnecting
the interface cable, be sure to turn off
the printer.
z
Do not connect the printer to a
non-standard power source.
z
Unpack the printer. Make sure that the
printer body and all accessories are
included in the package and no parts are
damaged.
z
Do not sue the printer in a location
exposed to direct sunlight or close to a
heater or other heat generating equipment.
z
Do not use the printer in a dusty location
or any location subject to sudden changes
in temperature and humidity.
Cautions in setting up
z
If any foreign matter gets into the
printer, turn off the printer
immediately and remove the foreign
matter.
z
If the case or cover becomes dirty,
clean it with a soft cloth moistened
with a small quantity of neutral
detergent diluted with water. Never
use a hard cloth or volatile solvent
such as alcohol, thinner, or benzine.
z
Take care not to twist the ribbon
while installing the ribbon cassette.
z
Never try to print without a ribbon
cassette installed and paper loaded.
z
Push the lock levers of both tractors to the
LOCK positions firmly while loading
fanfold paper or single sheet paper. It is
for the purpose of setting paper path
securely.
z
Do not turn off the printer during printing,
as this may lead to a malfunction.
Safety Cautions