BP-900KII User's Manual
- 45 -
According to different storage conditions, paper would easily become fold, bend or curliness
through manually disposal, transport and deposit. Therefore, they would affect paper feeding
when using these papers. Thus, please use them after amending according to the following
regulations. The papers which failed to come up to specifications would affect paper feeding
seriously, please do not use them.
○
Fold (cut sheet, continuous paper)
• The paper that the whole page has folded can not be used.
(As the paper strength has been changed even though after amending.)
• Please amend the fold of the corner for less than 2 mm.
○
Bend and curliness (cut sheet, continuous paper)
• The paper can be used when the bend of the whole page less than 2 mm.
• The bend length starts from the bend point should within 15mm. But when the bend height is
over 2 mm, paper can not be used.
6.1.4 Continuous Paper
Continuous paper is the continuous paper which has tractor holes and the traverse perforations
lines.
Refer to the following table for the requirement of continuous paper.
The paper that the whole page has folded can not be used.
The fold of corner
Amend it less
than 2mm
More than 15 mm
Bend
Amend to
less than
2 mm
Less than 15 mm
Whole page bend
Less than 2 mm
Arc
