BP-900KII User's Manual
- 34 -
the printer would use break pin compensation function.
4.6.4 Alignment Adjust Mode
In the online mode, press
online
+
LF/FF
buttons at the same time for about 3 seconds, so that the
printer enters into the alignment adjust mode.
In the Bidirectional adjust mode,
online
light blinks. Press
LOAD/EJECT
button or
LF/FF
button to
adjust.
LF/FF
button: Press to move the odd line to the right (original parameter values increase)
LOAD/EJECT
button: Press to move the odd line to the left (original parameter values decrease)
High speed
button: Enter into the next adjustment. Long press it to switch between “COPY” or
“UNCOPY” alignment adjust modes.
Online
button: Save the current setting to EEPROM and then print out the current BI-D adjust result.
Turn off the printer to exit the adjusting mode.
Note: BI-D adjust mode will affect the printing quality, think over before adjust it and strict to
the instructions while adjusting.
