BP-900KII User's Manual
- 25 -
Chapter 4 Control Panel
4.1 Button, LED Light and LCD Display on the Control Panel
There are four buttons, two LED lights and a LCD display on the control panel. (As shown in figure
4-1)
The LCD display is dot matrix display part (128×32 dots), the display size is 62.7mm*17.6mm.
The control panel is shown as follows:
The meaning of LED light is shown as follows:
Table 4-1: The meaning of LED light on the control panel
4.2 Basic Operation of the Control Panel
There are four buttons on the control panel for using.
Button Function
Online
►
II
Press
Online
button, switch between Online and Offline modes.
Load/Eject
▼
When there is paper in the printer and it is in offline mode, press this button to
eject paper.
In online mode, press this button for about 3 seconds, the printer would detect the
fiber sensor state.
LF/FF
▲
In the offline mode, press this button to feed the paper line by line. Alternatively, in
the offline mode, hold this button down for about 3 seconds, the printer would eject
the loaded paper; in the online mode, hold this button down for about 3 seconds,
printer would enter printing home position adjustment.
LED light
Off
On
Blink
Power (red)
The power is off
The power is on
Paper out or malfunction occurs
Online (green)
The Printer is offline
The Printer is online
Malfunction occurs
Figure 4-1 Control panel
