- 24 –
wwww.johnnyvac.com
4. Remove the end cap of rolling brush, take out old rolling brush and replace it with a new one, then
install the end cap. (As shown in Figure 27
Figure 27
Install filter
1.
Park the machine on stable ground.
2.
Turn off the key switch of machine.
For the sake of safety: Park the machine on horizontal surface, switch off it and take the key out when
you leave or maintain the machine.
3.
Connect the wire of dust vibration motor of filter. (Figure 28)
Figure 28
4. Open the garbage can and remove it at first, then pull down the fixed rod and take out filter along
the rail, finally, pull up the fixed rod. (Figure 29-30)
Figure 29
Figure 30
