- 13 –
wwww.johnnyvac.com
1) When the machine is placed or parked in a fixed place in the transportation, the electromagnetic
switch shall be started to avoid unexpected sliding, which is located in front wheel. The steering wheel
is required to be rotate to the right side completely after parking the machine stably, or it is feasible to
adjust the front wheel by manual. ( As shown in Figure 9).
2) Electromagnetic brake status of sweeper: the fault indicator on control panel flash three times first,
and then flash twice; Pull the electromagnetic brake handle backward once, then the automatic brake
will be recovered, and the machine can work normally as well. (As shown in Figure 10).
Figure 9 Figure 10
Adjust the height of side brush:
When the side brush is worn and shortened after long time use, it is available to adjust the height of it.
First, park the machine and put down the side brush, then rotate the adjusting knob of side brush and
adjust it to the right position after observation. (As shown in Figure 11)
Figure 11
Brake pedal
Fault indicator
Electromagnetic brake handle
