Johnson Pump SPX Flow CombiLineBloc, Instruction Manual

Page: 8 / 67

6
CLB/EN (1901) 6.6
3.6 Installation 26
3.7 Connecting the electric motor 26
4 Commissioning 27
4.1 Inspection of the pump 27
4.2 Inspection of the motor 27
4.3 Preparing the pump unit for commissioning 27
4.4 Checking the sense of rotation 27
4.5 Pump in operation 28
4.6 Noise 28
5 Maintenance 29
5.1 Daily maintenance 29
5.2 Mechanical seal 29
5.3 Lubrication of the bearings 29
5.4 Environmental influences 29
5.5 Noise 29
5.6 Motor 29
5.7 Faults 30
6 Problem solving 31
7 Disassembly and assembly 33
7.1 Precautions 33
7.1.1 Switch off the electricity supply 33
7.1.2 Disconnecting the electricity supply 33
7.1.3 Support of the piping 33
7.1.4 Liquid draining 33
7.2 Removing the pump 33
7.2.1 Back-Pull-Out system 33
7.3 Disassembly 34
7.3.1 Disassembling the Back-Pull-Out unit 34
7.3.2 Assembling the Back-Pull-Out unit 34
7.4 Impeller 35
7.4.1 Disassembling the impeller 35
7.4.2 Mounting the impeller 36
7.5 Mechanical seal 37
7.5.1 Instructions for mounting a mechanical seal 37
7.5.2 Disassembling a mechanical seal M1 38
7.5.3 Assembling a mechanical seal M1 39
7.6 Replacing the stub shaft and the motor 40
7.6.1 Disassembling the stub shaft and the motor 40
7.6.2 Assembling the stub shaft and the motor 41
8 Dimensions 43
8.1 Dimensions drawings 43
8.2 Pump dimensions 44
8.3 Overall length (G) 45
8.4 Weight 46
8.5 Flange dimensions 47
8.6 Base plate dimensions 47
9 Parts 49
9.1 Ordering parts 49
9.1.1 Order form 49
9.1.2 Recommended spare parts 49