Johnson Controls tyco iSTAR Ultra, Installation And Configuration Manual

Page: 35 / 118

Power Requirements
iSTAR Ultra Installation and Configuration Guide 2–11
Wall GCM and (1) ACM 23.88 Watts 81.5
Wall GCM and (2) ACMs 29.88 Watts 102.0
ELECTROSTATIC SENSITIVE DEVICES : Observe precautions for handling.

Before handling any internal components, discharge static electricity by
touching and holding a a grounded surface for three seconds.

Wear a grounding wrist strap and stand on a grounded static mat.

Reduce movement during installation to reduce static buildup.

Make sure work area is safeguarded.

Transport components in static-shielded containers.
Note: The outside of the ESD bags are not ESD protective.

Verify that all components, materials, and the installer are referenced to a
common ground.
Table 2-9: Maximum Heat Dissipation, continued
Configuration
Power Dissipated in
Enclosure
BTU/hour