Table 8: FEC26 UI Inputs and jumper labels
Universal Input label
Jumper label on circuit board
IN6
J25
Setting up an integral or local display
FEC2621 models have an integral LCD and push button
user interface that allows you to set up and monitor the
FEC, the FEC I/O points, and the modules and I/O points
connected on the SA bus. FEC2611 models do not have an
integral display, but can be connected to a DIS1710 Local
Controller Display. For detailed information on setting
up and operating either an integral user interface or a
remotely connected DIS1710 display, refer to the
DIS1710
Local Controller Display Technical Bulletin (LIT-12011270)
.
Commissioning the Controllers
You commission the controllers with CCT software,
using either a MAP gateway, a Bluetooth
®
Wireless
Commissioning Converter (BCVT), a USB dongle with
ZigBee
®
, Ethernet connection, or in BACnet router mode
when connected to an NAE or NCE. Refer to the
Controller
Tool Help (LIT-12011147)
for detailed information on
commissioning controllers.
Note:
The MAP Gateway serves as a replacement for
the BTCVT, which is no longer available for purchase,
but continues to be supported.
FEC26 Field Equipment Controllers Installation Guide
20
