Physical features
Figure 1: FEC2621 physical features
Table 1: FEC2621 Physical Features
Callout
Physical Feature: Description and References
1
Binary Output (BO) Source Power Selection Jumper Pin Blocks, 3 – BO Jumper Pin Blocks. See Table 3 for more
information.
2
Device Address DIP Switch Block. See
for more information.
3
for more information.
4
Configurable Output (COs) Terminal Blocks. See Table 3 for more information.
5
Analog Outputs (AOs) Terminal Block. See Table 3 for more information.
6
24 VAC, Class 2 Supply Power Terminal Block. See Table 5 for more information.
7
Cover Lift Tab (One of Two). See
for more information.
8
Display Navigation Buttons. See
Setting up an integral or local display
.
Note:
Not available on all FEC models.
9
Liquid Crystal Display (LCD) Display Area
Note:
Not available on all FEC models.
10
Field Controller (FC) Bus Terminal Block. (See
11
Sensor Actuator (SA) Bus Terminal Block. (See
12
Sensor Actuator (SA) Bus (RJ-12 6-pin Modular Jack). See
.
13
Binary Input (BI) Terminal Block, 2 – Binary Inputs. See Table 3 for more information.
14
Universal Input (UI) Terminal Blocks, 6 – Universal Inputs. See Table 3 for more information.
15
LED Status Indicators. See Table 9 for more information.
16
Field Controller (FC) Bus Port (RJ-12 6-pin Modular Jack). See
for more information.
17
Binary Output (BO) Terminal Blocks. See Table 3.
Mounting
Observe these guidelines when mounting a controller:
• Ensure the mounting surface can support the
controller, DIN rail, and any user-supplied enclosure.
• Mount the controller horizontally on 35 mm DIN rail
whenever possible.
• Mount the controller in the proper mounting position.
• Mount the controller on a hard, even surface whenever
possible in wall-mount applications.
• Use shims or washers to mount the controller securely
and evenly on the mounting surface.
• Mount the controller in an area free of corrosive vapors
and observe the Ambient Conditions requirements.
FEC26 Field Equipment Controllers Installation Guide
3