GENERAL
YORK Saber units are single package air conditioners
equipped with optional factory installed electric heaters and
designed for outdoor installation on a rooftop or steel
structure.
The units are completely assembled on rigid, permanently
attached base rails. All piping, refrigerant charge, and
electrical wiring is factory installed and tested. The units
require electric power, duct connections and drain piping
connections at the point of installation.
The supplemental electric heaters have nickel-chrome
elements and utilize single point power connection.
SAFETY CONSIDERATIONS
Due to system pressure, moving parts and electrical
components, installation and servicing of air conditioning
equipment can be hazardous. Only qualified, trained, service
personnel should install, repair, maintain or service this
equipment.
Observe all precautions in the literature, on labels and tags
accompanying the equipment whenever working on air
conditioning equipment. Be sure to follow all other safety
precautions that apply.
Wear safety glasses and work gloves, and follow all safety
codes. Use a quenching cloth and have a fire extinguisher
available for all brazing operations.
INSPECTION
As soon as a unit is received, it should be inspected for
possible damage during transit. If damage is evident, the
extent of the damage should be noted on the carrier’s freight
bill.
RENEWAL PARTS
Refer to York USER’S MAINTENANCE and SERVICE
INFORMATION MANUAL. It is strongly suggested that only
genuine YORK Spare Parts are used to ensure efficient
working of the unit and safety.
Installer should pay particular attention to the words :
NOTE, CAUTION and WARNING.
NOTES are intended to clarify or make the installation easier.
CAUTIONS are given to prevent equipment damage.
WARNINGS are given to alert installer that personal injury
and/or equipment damage may result if installation
procedure is not handled properly.
TYPICAL UNIT CONFIGURATION
CAUTION
THIS PRODUCT MUST BE INSTALLED IN STRICT COMPLIANCE
WITH THE ENCLOSED INSTALLATION INSTRUCTIONS AND
ANY APPLICABLE LOCAL, STATE, AND NATIONAL CODES
INCLUDING, BUT NOT LIMITED TO, BUILDING, ELECTRICAL,
AND MECHANICAL CODES.
WARNING
IMPROPER INSTALLATION MAY CREATE A CONDITION
WHERE THE OPERATION OF THE PRODUCT COULD CAUSE
PERSONAL INJURY OR PROPERTY DAMAGE.
Page 3
Installation, Operation and Maintenance Manual : 036-1011(0806)
FIGURE 1 : TYPICAL UNIT CONFIGURATION
