background image

 JCI FMS-1655

The Next Generation in Critical Airflow Controls 

CMS-1655 Central Monitoring Station  

Installation and Programming Manual

 

LB-CMS1655-S  

LB-CMS1655-T

Code No. LIT-12013121, Rev. A

Issued August 2018

Refer to the QuickLIT website for the most up-to-date version of this document.

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 

when this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate 

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause 

harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful 

interference, in which case users will be required to correct the interference at their own expense.

Application

These installation instructions guide the installer through the installation of the CMS-1655 Central Monitoring Station.

Please read these instructions thoroughly before beginning installation. 

North American Emissions Compliance

United States

Canada

Installation

This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment 

Regulations.

Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du 

Canada.

IMPORTANT

: The CMS-1655 Central Monitoring Station must be wired to 24 VAC only. Wiring the unit 

to 110 VAC will cause serious damange and void the warranty. 

Risk of Property Damage.

 

Ensure that the power source conforms to the requirements of the equipment. Failure to use a correct power 

source may result in permanent damage to the equipment.

Risque de dégâts matériels.

 

S’assurer que la source d’alimentation électrique est conforme aux spécifications de l’équipement. L’utilisation 

d’une source d’alimentation électrique inappropriée risque d’endommager irrémédiablement l’équipement.

NOTICE

NOTICE

Use of the software that is in (or constitutes) this product or access to the cloud or hosted services applicable to 

this product, if any, is subject to applicable terms set forth at www.johnsoncontrols.com/techterms.  Your use of this 

product constitutes an agreement to such terms.  If you do not agree to be bound by such terms, you may return 

the unused product to your place of purchase

.

Summary of Contents for CMS-1655






















Reviews: