Johnson Controls CIW01 Operation Manual Download Page 35

Page: 35 / 52

P5415479

8.16 Daylight Saving Time

This function adjusts time forward or backward
an hour when daylight saving time starts or ends.

(1) Select “Daylight Saving Time” from the

“Menu” screen and press “OK”.

(2) The “Daylight Saving Time” screen is

displayed. Select “Put 1h forward” with “ ”
or “ ” and press “OK”.

(3) The daylight saving time con

rmation screen

is displayed. Select “Yes” using “ ” or “ ”
and press “OK” to con

rm the setting.

The screen returns to normal mode.

Back

Put 1h backward

Put 1h forward

Daylight Saving Time

Entr

Rtrn

Sel.

15:10(Fri)

Back

Put 1h forward?

Daylight Saving Time

Yes

Sel.

Entr

Rtrn

15:10(Fri)

■

Stop Daylight Saving Time

(1) Select “Daylight Saving Time” from the

“Menu” screen and press “OK”.

(2) The “Daylight Saving Time” screen is

displayed. Select “Put 1h backward” using
“ ” or “ ” and press “OK”.

(3) The “Daylight Saving Time” con

rmation

screen is displayed. Select “Yes” using “ ”
or “ ” and press “OK” to con

rm the setting.

The screen returns to normal mode.

Back

Put 1h backward

Put 1h forward

Daylight Saving Time

Entr

Rtrn

Sel.

15:10(Fri)

Back

Put 1h backward?

Daylight Saving Time

Yes

Sel.

Entr

Rtrn

15:10(Fri)

Back/Help

Summary of Contents for CIW01





















































Search results

Summary of Contents for CIW01

Reviews:

Related manuals for CIW01

Brands by name

Popular brands

Johnson Controls CIW01, Operation Manual

Search results

Summary of Contents for CIW01

Reviews:

Related manuals for CIW01

Brands by name

Popular brands