Johnson Controls CIC4008B21S Operation Manual Download Page 31

Page: 31 / 38

P5417055

7. Maintenance

7.1 Daily Maintenance

7.1.1 Cleaning Air Filter
Clean the air filter when the filter sign is turned ON.

Knobs

(Two places)

Air Inlet Grille

(1) Open the air inlet grille.

Slide the knobs on both sides of the air inlet grille

in the direction of the arrows as shown, and open

the air inlet grille.

(2) Remove the air filter.

Support the underside of the air inlet grille

as shown. Unhook the filter from the air inlet

grille and remove the air filter.

Upper Part of Filter

Hook

Lower Part of Filter

Air Filter

Air Inlet Grille

● Hold the air filter and the air inlet grille securely by hand when attaching or removing it. If not, it may

cause the unit to fall, resulting in serious injury.

● Use light pressure with a clean soft cloth when cleaning the lens of the motion sensor. The surface

material of the lens is easily scratched, blemished, and can result in degraded performance of the sensor.

NOTICE

● Turn OFF the power source before maintenance work. If the power source is not turned off, a fire or an

electric shock may result.

● Perform the maintenance work with a stable foothold or foundation. This may prevent falling or injury.

Filter Sign

Back/Help ECO

On/Off

A/C

MODE SPEED

TEMP

COOL

LOUV.

Adj.

Meeting Room

LOUV.

FLTR

Motion Sensor ON

Avoid

Summary of Contents for CIC4008B21S







































Search results

Summary of Contents for CIC4008B21S

Reviews:

Related manuals for CIC4008B21S

Brands by name

Popular brands

Johnson Controls CIC4008B21S, Operation Manual

Search results

Summary of Contents for CIC4008B21S

Reviews:

Related manuals for CIC4008B21S

Brands by name

Popular brands