Johnson Controls CCXL01, Engineering Manual

Page: 3 / 24

TC-19001 i
Important Notice
● Johnson Controls Inc. pursues a policy of continuing improvement in design and performance in its
products. As such, Johnson Controls Inc. reserves the right to make changes at any time without prior
notice.
● Johnson Controls Inc. cannot anticipate every possible circumstance that might involve a potential
hazard.
● This central controller is designed for VRF air conditioning applications only.
Do not use this product for anything other than the purposes for which it was intended for.
● The installer and system specialist shall safeguard against leakage in accordance with local pipe fi tter
and electrical codes. The following standards may be applicable, if local regulations are not available.
International Organization for Standardization: (ISO 5149 or European Standard, EN 378). No part of
this manual may be reproduced in any way without the expressed written consent of Johnson Controls
Inc.
● This central controller is operated and serviced in North America and comes with a full complement of
the appropriate Safety, Danger, Caution and Warnings.
● If you have questions, please contact your distributor or contractor.
● This manual provides common descriptions, basic and advanced information to maintain and service
this central controller which you operate as well for other models.
● This manual should be considered as a permanent part of the air conditioning equipment and should
remain with the air conditioning equipment.
● No part of this manual may be reproduced without the expressed written permission of Johnson
Controls, Inc.
Product Inspection upon Arrival
1. Upon receiving this product, inspect it for any damages incurred in transit. Claims for damage, either
apparent or concealed, should be fi led immediately with the shipping company.
2. Check the model number, electrical characteristics (power supply, voltage, and frequency rating), and
any accessories to determine if they agree with the purchase order.
3. The standard utilization for this unit is explained in these instructions. Use of this equipment for
purposes other than what it designed for is not recommended.
4. Please contact your local agent or contractor as any issues arise involving installation, performance,
or maintenance arise. Liability does not cover defects originating from unauthorized modi fi cations
performed by a customer without the written consent of Johnson Controls, Inc.
Performing any mechanical alterations on this product without the consent of the manufacturer will
render your warranty null and void.