2
Read these installation instructions first before installing the appliance. Carefully read
the user instructions before igniting the appliance. Failure to follow these instructions
may lead to risk of explosion and/or fire and could cause material damage and/or bodily
harm. Installation and commisioning should be carried out by a qualified competent
installer. The type of gas and the value at which the appliance is set standard in the
factory are registered on the rating plate. The appliance may only be installed in a room if
this room meets the ventilation requirements.
STATE WATER HEATERS ACCEPTS NO RESPONSIBILITY FOR WARRANTY, SER-
VICE AND/OR PRODUCT LIABILITY IN CASE OF UNAUTHORISED ALTERATIONS,
PRODUCT MODIFICATIONS OR REPAIR.
