BATTERY ELECTRICITY METER
Battery electricity meter display battery capacity. When the battery is fully charged, all the LED indicators
will be on and then go out in sequence from right to left.
NOTE:
To prolong batteries service life, charge them timely after use.
It is best to stop scrubbing and charge the battery cells when the left light is blinking. Scrubbing function
will be automatically shut off during excessive operations with left light blinking to prevent the battery cells
from running out. Charge the battery cells immediately in this case
(Figure 13)
.
Your machine is equipped with a pressure gage for the brushes. This gage helps you to get the pressure
you need for the brushes. If the gage is red, there is too much pressure. Never have the gage in red light.
It can affect the motor and the brushes
(Figure 14)
.
OVERLOAD CIRCUIT BREAKER
This model is equipped with a restorable overload protector with a button
located on the control panel
(Figure 15)
to avoid damages to brush
motor. When the overload protector is activated and triggers blackout,
please check the reason, then press the overload protector button
manually after the motor cools down.
Contact an authorized service center for machine maintenance.
TIMER
The timer is used to count the total working hours of brush motor. Refer to
this timer for the maintenance visits of your device
(Figure 16)
.
Figure 15
Figure 16
- 19 -
User Guide
JVC65RBTN
M A C H I N E O P E R AT I O N
Figure 13
Figure 14
