FILL THE SOLUTION TANK
Use the water injection hole in the front of the machine to fill the solution into the solution tank
(Figure 8)
.
Scrubbing method:
hot water (not higher than 60°C) is required. Pour a suggested amount of detergent
and water into the solution tank for mixing according to instructions on the detergent container.
NOTE:
When filing the solution tank with a bucket, make sure that it is clean. Do not use the same bucket
for filling and draining he machine.
ATTENTION:
For conventional scrubbing, only use recommended cleaning detergents. Machine damage
due to improper detergent usage (such as washing powder) will void the manufacturer's warranty.
WARNING:
Do not use inflammable liquids in case of fire or explosion.
FOR SAFETY:
Follow the mixing and handling instructions on detergent container .
- 15 -
User Guide
JVC65RBTN
M A C H I N E I N S TA L L AT I O N
Figure 8