John Lewis JLBIOS617, User Manual

Page: 43 / 56

2. Activate the appliance and select from the
main menu the function: Pyrolysis. Press to
confirm.
3. Set the duration of the cleaning procedure:
Option Description
Quick 1 h for a low de-
gree of dirt
Normal 1 h 30 min for a
usual degree of
dirt
Intense 2 h 30 min for a
high degree of dirt
4. Touch to confirm.
When the pyrolytic cleaning starts,
the appliance door is locked and
the lamp does not work.
To stop the pyrolytic cleaning
before it is completed, deactivate
the appliance.
Warning! After the function is
completed, the appliance is
very hot. Let it cool down.
There is a risk of burns.
After the function is completed, the
door stays locked for the cool
down phase. Some of the appliance
functions are not available during
the cool down phase.
Removing and installing the
door
You can remove the door and the internal glass
panels to clean it. The number of glass panels is
different for different models.
Warning! Be careful when you
remove the door from the
appliance. The door is heavy.
1. Open the door fully.
2. Fully press the clamping levers (A) on the two
door hinges.
A
A
3. Close the oven door to the first opening
position (approximately 70° angle).
4. Hold the door with one hand on each side and
pull it away from the appliance at an upwards
angle.
5. Put the door with the outer side down on a
soft cloth on a stable surface. This is to prevent
scratches.
6. Hold the door trim (B) on the top edge of the
door at the two sides and push inwards to
release the clip seal.
1
2
B
7. Pull the door trim to the front to remove it.
8. Hold the door glass panels on their top edge
one by one and pull them up out of the guide.
9. Clean the glass panel with water and soap. Dry
the glass panel carefully.
Oven User Manual 43