John Lewis JLBIOS617, User Manual

Page: 22 / 56

Using the accessories
Warning! Refer to Safety
chapters.
Core temperature sensor
There are two temperatures to be set: the oven
temperature and the core temperature.
The core temperature sensor measures the
core temperature of the meat. When the meat
is at the set temperature, the appliance
deactivates.
Caution! Only use the core
temperature sensor supplied
or the correct replacement
parts.
The core temperature sensor must
stay in the meat and in the socket
during the cooking.
1. Activate the appliance.
2. Put the tip of the core temperature sensor into
the centre of the meat.
3. Put the plug of the core temperature sensor
into the socket at the front of the appliance.
The display shows the core temperature sensor
symbol.
4. Press or in less than 5 seconds to set
the core temperature.
5. Set the heating function and, if necessary, the
oven temperature.
The appliance calculates an approximate end
time. The end time is different for the different
quantities of the food, the set oven
temperatures (minimum 120 °C) and the
operating modes. The appliance calculates the
end time in approximately 30 minutes.
6. To change the core temperature, press .
When the meat is at the set core temperature,
an acoustic signal sounds. The appliance
deactivates automatically.
7. Touch any symbol to stop the signal.
8. Remove the core temperature sensor plug
from the socket and remove the meat from
the oven.
Warning! The core
temperature sensor is hot.
There is a risk of burns. Be
careful when you remove the
tip and the plug of the core
temperature sensor.
Oven User Manual 22