John Bean EHP System I, Operation Instructions Manual

Page: 6 / 28

- Page 6 -
Overinflated tires or rims mounted on the wrong sized rims can explode
producing hazardous flying debris.
•••••
Read Operator’s Manual before using this Tire Changer.
•••••
Never mount tire on rim with different sized diameter.
•••••
Never exceed maximum inflation pressure listed on tire sidewall.
•••••
Always use safety restraint arm to hold wheel in place while
inflating.
•••••
Always use attached air hose to inflate tires.
Exploding tires can cause death or serious injury.
Risk of electrical shock.
•••••
Do not operate equipment with a damaged power cord or if the
equipment has been dropped or damaged, until it has been
examined by a qualified service person.
•••••
If an extension cord is necessary, a cord with a current rating equal
to or greater than that of the equipment should be used. Cords
rated for less current than the equipment can overheat.
•••••
Unplug equipment from electrical outlet when not in use. Never
use the cord to pull the plug from the outlet. Grasp plug and pull to
disconnect.
•••••
Do not expose the equipment to rain. Do not use on wet surfaces.
•••••
Plug unit into correct power supply.
•••••
Do not remove or bypass grounding pin.
Contact with high voltages can cause death or serious injury.
Risk of electrical shock. High voltages are present within the base unit.
•••••
There are no user serviceable items within the unit.
•••••
Service on the unit must be performed by qualified personnel.
•••••
Do not open any part of the base cabinet.
•••••
Turn power switch off and unplug the unit before servicing.
Contact with high voltages can cause death or serious injury.
SAFETY INSTRUCTIONS
IMPORTANT!! SAVE THESE INSTRUCTIONS
For Reference Only
For Current Info See Equiserv.com