John Bean EHP System I, Operation Instructions Manual

Page: 16 / 28

- Page 16 -
3.0 CONTROLS
549
Figure 8
Before operating the machine, take the time to familiar-
ize yourself with the operation and function of all the
controls.
A Press down and release the first pedal (1) from the
left: the jaws of the turntable will retract. Do it again:
the jaws will expand. If you press the pedal prior to
the end of the stroke and release, the jaws may be
stopped in any position.
B Open the bead breaker arm. Press down and hold
the second pedal (2) from the left: by doing this you
operate the bead breaker blade and the arm will
move towards the machine. Release the pedal:
the bead breaker blade will retract.
WARNING!
WATCH YOUR FINGERS AND LEGS!
541a 542a
C Press down the first pedal (3) from the right: the
turntable turns clockwise. Placing your foot under
the pedal and lift, the turntable turns counterclock-
wise.
D Lower the Lock Lever (4 ) to unlock the vertical slide,
lift the Lock Lever to lock.
E Turn Swing Arm Adjustment Knob (5) for position-
ing mount/demount head slightly away from rim di-
ameter
F Press bead-seater pedal on left side of the ma-
chine (6 ) half way down: air will come out from
inflation hose end.
G Press bead-seater pedal (6) all the way down swiftly
to get air blast from the inflator jets in the clamping
jaws. Air simultaneously comes out of inflator hose.
ATTENTION!
WHEN OPERATING THE BEAD SEATER IT IS MANDA-
TORY TO WEAR SAFETY GLASSES TO PROTECT EYES.
Models with SRA attached
H
Safety Restraint Arm (7) swings to center of the turn-
table.
I Lift upward on the restraint positioning knob (8) to
position over tire/wheel assembly for inflation, at
the same time push down on the Anti-rotation Lock
Arm to release lock. (9) You may now swing the
safety restraint arm to position on the center of the
wheel. Lower the restraint until the rubber pad on
the restraint disc is resting on the rim center. The
SRA is a gravity lock which will automatically lock if
any force other than the restraint position knob is
lifted. You are now ready for the inflation process.
NOTE: the air supply will not function until the safety
arm is centered over the turntable.
9
For Reference Only
For Current Info See Equiserv.com