vision
Snack Plus/Easy Combo
//
Vending
MNP86V03GBV00
Date: 2010/06/14 Rev. 0
PAGE 59 OF 62
7.5. Cleaning and Maintenance
Cleaning the machine
To ensure the machine works properly at all times, we recommend that the following
components be cleaned periodically:
►
The outside glass should be cleaned periodically with a moist cloth or sponge and a
neutral product suitable for cleaning glass.
►
Whenever there is a spill in the product delivery bin, it should be cleaned with a cloth
moistened with water and all moving parts should be checked to ensure that they move
freely.
►
If there is a spill on a tray, remove the tray from the machine and clean it using a cloth
moistened with water, never with alcohol or acids. Remove the channels from their slots
to better be able to clean the whole surface. Check that the belt moves freely and that it
is not obstructed anywhere along its path. Wait until it is completely dry before
reinstalling it.
►
In general, keeping all internal areas that are visible to consumers clean increases
sales and improves the image of the machines.
►
To access the lower trays (restocking area) open the machine’s exterior door and take
out the trays one at a time sliding them along their guides..
►
There is a slotted opening at the front, on the lower right-hand side, that allows air to
circulate inside the machine. This area, as well as the cooling unit condenser, which is
just behind the opening, should be cleaned regularly with a broom, brush or compressed
air to make sure that they are not obstructed by papers, bags or dust.
►
The machine should never be cleaned with a water jet.
►
The machine’s interior should always be dry to ensure it works properly.
►
When handling the cooling unit, always do so with the machine turned off and make
sure that you do not bend any pipes, as they could break and produce a gas leak.
►
Never touch those areas powered at 220 V, such as the ballast box, the power box
and the cables leading to the fluorescent light. To access areas where there are
components powered at 220 V, open the machine’s outside door and use a Philips screw
driver to remove the metal boxes protecting these components.
►
Access to servicing area should only be permitted to persons with a knowledge of and
practical experience in the machine, particularly with regard to health and safety.
