vision
Snack Plus/Easy Combo
//
Vending
MNP86V03GBV00
Date: 2010/06/14 Rev. 0
PAGE 27 OF 62
- Identifying the program recorded in a card.
4.-
After choosing the operation, you have to select the machine with which you wish to
communicate.
5.-
You need to select the file you are going to record.
-The program can work with two standard reference file formats, .HEX (Intel) and
.BIN. When the program has more than one bank, the file extensions will be .H00,
.H01, .H02 … (or .B00, .B01, .B02 …) and so on until all banks are completed. In
these cases, the program will only show the file of the first bank (.H00 or .B00).
-When you select a file, if the extension is .HEX or .BIN the program will know that
there is only one bank, while if it is .H00 or .B00 it will search for files with
consecutive extensions until it does not find any more (maximum .H09 or .B09) and
the number of files will be the number of banks recorded.
6.-
After all the data has been recognised, the program will begin the operation chosen.
- This process is divided in two parts, the first is erasing the flash memory and the
second is the program recording.
7.-
When the recording program has finished communicating with the machine, a new
window will appear showing the result of the process.
(For more information, consult the manual of the EASYFLASH reprogramming device)
5.7. Machine programming mode
5.7.1. Standby menu without credit (standby status)
This menu will be in standby status, shown on the display by rotating, in small intervals,
the advertising message, the time, the temperature (if there is a cooling unit) and the
program version. Press the product selection pushbutton pane and the display will show
the price of the product and the position of the channel previously assigned in the
programming menu.
Note:
If the machine is out of service, the cause will be shown on the display. In such cases,
the machine does not accept any coin nor is any sale allowed. The machine may be out
of service due to temperature expiry, because no connected motor has been detected
(this may be because no tray has been connected to the machine or because the cable
between the trays and the control card has not been connected), or because of a
breakdown in the product detection system.
PUSH BUTTON TO D
11:00 +23.0
º
C
PRODUCT PRICE
X.XX EUR
SELECTION N
XX
JOFEMAR S.A.
WWW.JOFEMAR.COM
PUSH BUTTON TO D
11:00 +23.0
º
C
PUsh button
TO DISPLAY PRICE
VISION V.3
11:00 +23.0
º
C
