vision
Snack Plus/Easy Combo
//
Vending
MNP86V03GBV00
Date: 2010/06/14 Rev. 0
PAGE 42 OF 62
Access the menu where you choose the channel number where you can choose the
channels with an expiry date to be deleted.
In any of the previous options menus, if you wish to return to previous
menu.
[20] PRODUCT AND MACHINE CODES
The last window selected will appear.
Goes to the next option.
..............................................................................
•
In the machine code programming option
, on display se will show the code
currently programmed and then you will have the option of entering the 6 numbers
to change this code.
To do this use the keys
a
.
•
In the product code programming option
access the menu where you choose
the selection number. Once you have chosen this number, the display will show
the code currently programmed for that selection number and then you will have
the option of entering the 4 numbers to change this code.
To do this use the keys
to
.
In any of the previous options menus, the numbers we have entered
are cancelled and pressing the same key again will take you back to
the main menu.
[21] RS-232C SERIAL PORT
This address allows the operator to obtain several types of report tickets.
The information the information is transmitted via an RS232C interface. The data format
is ASCII, with one start bit, 8 data bits and one stop bit. The RS232 interface is
connected to a five pin DIN 5 connector at 180 degrees as shown in figure 38.
RS232
communication
New code
_ _ _ _
Code:0000
SELECtION number
_
PRODUCT
CODES
MACHINE
CODE
New code
_ _ _ _ _
Code:000000
PRODUCT
CODES
CODES
PROGRAMMING
SELECTION NUMBER
_
SELECTION NUMBER
_
ERASE EXP. DATE
PER CHANNEL
ERASE EXP. DATE
PER CHANNEL
ERASE EXP. DATE
PER CHANNEL
