JACOBSEN HR9016 Cab Operator Manual & Parts List
Jodale • Perry Printed: 4/4/2008
21
◄
TABLE OF CONTENTS
MOUNTING INSTRUCTIONS
O
PTIONAL
H
EATER
I
NSTALLATION
Draining anti-freeze.
Drain anti-freeze from engine before proceeding.
1.
Installing the pressure fitting.
Locate the thermostat housing on the
left side of the engine. Remove the
plug, and install the 3/8” NPT X 5/8”
barb - 135° fitting. This is the
pressure fitting.
2.
Installing the suction fitting.
Locate the water pump on right side
of engine. Remove the plug, and
screw in 3/8NPT X 5/8” barb - 135°
fitting. This is the suction fitting.
3.
Connecting heater hoses.
Locate the pressure heater hose (labeled) at the
base of left rear cab post. Route the hose into the engine bay. Connect hose to
the pressure fitting using one provided HS-10 hose clamp. Locate hose at the
right rear cab post, and route into engine toward the suction fitting. Connect hose
to suction fitting using one provided HS-10 hose clamp.
Summary of Contents for Jacobsen HR9016
Page 1: ...Printed 4 4 2008 ...