background image

11 

 

C) Following the user manual, if need to turn off the engine. 
 
 
 
 
 

             

 

5. Operation attention 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Chapter VI. Maintenance   

Due to rotary situation, abrasion and load change of mini tiller, bolts will become loose and parts 
will be worn during the work. These changes will destroy the proper working state of mini tiller, 
create abnormal fitting clearance, degrade output of gasoline engine, increase oil consumption, 
lead  to  the  maladjustment  of  spare  parts,  increase  malfunction  of  mini  tiller.  All  these  will 
seriously  affect  the  working  efficiency  of  mini  tiller.  To  decrease  the  frequency  of  the 
above-mentioned accidents, prevention of maintenance work must be done strictly and regularly 
to keep the mini tiller in a good technical state and prolong its life. 

 

 

1. Running-in of mini tiller 

1.1 As for running-in of gasoline engine, please refer to its instruction. 

1.2 If mini tiller is new or is just heavily repaired, it should work without load for one hour. 

After  the  mini  tiller  works  with  light  load  for  five  hours,  all  oil  in  gear  box  and  crankcase  of 
gasoline  engine  should  be  drained  immediately.  Afterwards,  you  should  refuel  adequate  clean 

!   Attention 

Park the tiller on flatland. 

!  

Attention 

  5.1 When using mini tiller, you should pay attention to the working situation and 

sound  of every  part,  check  if  the  connection  is  good. There  mustn’t be  loosed 
connection. If there is abnormal situation, please stop the mini tiller and check. 

5.2 Never carry out work with heavy load if mini tiller has not been used for a long 

time, especially the new ones or the repaired ones. 

5.3  Pay  attention  to  the  oil  level  of  gasoline  engine,  walking  case  and  gear  box. 

When they are insufficient, please refuel them. 

5.4 Never cool the gasoline engine in the way of water-pouring. 
5.5 Prevent mini tiller from falling down when tilling. 
5.6 Never  install mini  tiller with  rotary  blades when  walking on  sand or  stone  to 

avoid damaging blades. 

5.7 After  tilling,  please  clear  away  dirtiness  on  the  mini tiller,  such as mud,  grass 

and oil stain. Keep the tiller clean. 

Summary of Contents for CT2067

















Reviews: