13
Debug
malfunction
√
Adjust
operation parts
√
Tighten
the
belt
√
Gear
and
bearing
√
4. Long-period storage of mini tiller
When mini tiller needs storing for a long period, the following measures should be taken
to prevent tarnishing.
◇
4.1 Wash oil stain and clean dust on the machine.
◇
4.2 Drain lube oil in the gear box and refuel new oil.
◇
4.3 Paint pickling oil on non-aluminum parts where there is no paint.
◇
4.4 Store mini tiller in the dry, safe place where there is enough aeration.
◇
4.5 Properly keep the attaching tools, certificates of conformity and instruction of mini
tiller.
Chapter VII. Adjustment methods and data
1. Adjustment of clutch cable
The abrasion of friction plates and the clutch shifting fork will make malfunction of clutch
after using for a long time, in this case, should adjust clutch accordingly.
◇
1.1 Clutch cable adjustment
◇
1.1.1 Every tiller must be equipped with one set of clutch limit usually open sleeve,
which cannot be replaced by a common clutch cable;
◇
1.1.2 When adjusting the clutch, must make sure the small sleeve running in the scale
range. When loosen clutch handlebar, the main output shaft should be stopped
immediately. Please replace a new clutch cable if the small sleeve runs out of the scale
range.
◇
1.1.3 When adjust clutch cable, please make the clutch cable adjusting rod on both
clutch shifting fork arm and armrest-frame in the proper position, and then tighten the
nut to lock them.
Small sleeve (press range: 2~4mm) usually open sleeve Clutch cable
2. Adjustment of throttle cable
Requirement
The small sleeve must work in the scale range after all adjustment done.
