10
6. TORQUE ADJUSTMENT (SEE FIG. G)
(Screw driving force of your drill driver)
The torque is adjusted by rotating the torque adjustment
ring. The torque is greater when the torque adjustment ring
is set on a higher setting. The torque is less when the torque
adjustment ring is set on a lower setting.
Make the setting as follows:
1 - 4 for driving small screws
5 - 9 for driving screws into soft material
10 - 14 for driving screws into soft and hard material
15 - 19 for driving screws into hard wood
20 - 21 for driving larger screws
for heavy drilling
7. AUTOMATIC SPINDLE LOCK (SEE FIG. H)
The automatic spindle lock allows you to use it as a regular
screwdriver. You can give an extra twist to firmly tighten a
screw, loosen a very tight screw or continue working when the
battery energy has expired. For manual screwdriver purposes,
the chuck is automatically locked when the tool is off.
8. USING THE LED LIGHT
To turn on the LED light simply press the on/off switch. When
you release the on/off switch, the light will be off.
LED lighting increases visibility-great for dark or enclosed
area.
9. DRILLING
When drilling into a hard smooth surface, use a center punch
to mark the desired hole location. This will prevent the drill bit
from slipping off center as the hole is started.
Hold the tool firmly and place the tip of the bit at the point to
be drilled.
Depress the switch trigger to start the tool.
Move the drill bit into the workpiece, applying only enough
pressure to keep the bit cutting. Do not force or apply side
pressure to elongate a hole.
Tungsten carbide drill bits should always be used for
concrete and masonry. When drilling in metal, only
use HSS drill bits in good condition. Always use a magnetic
bit holder when using short screwdriver bits. When screw-
driving, apply a small quantity of liquid soap or similar to the
screw threads to ease insertion.
10. DISPOSAL OF AN EXHAUSTED BATTERY PACK
To preserve natural resources, please recycle or
dispose of the battery pack properly. This battery pack
contains Lithium batteries. Consult your local waste
authority for information regarding available recycling and/
Fig.A
Fig.B1
Fig.B2
Fig.C
Fig.E
Fig.D2
Fig.D1
Fig.H
Fig.G
Fig.F
Summary of Contents for JMCDT218W
Page 1: ...SAFETY AND OPERATING MANUAL 18V DRILL DRIVER KIT JMCDT218W...
Page 5: ...5 1 2 3 4 5 9 8 7 6...
Page 12: ......
