jobmate JMCDT218W, Safety And Operating Manual

Page: 8 / 12

8
TO REMOVE THE BATTERY PACK (SEE FIG B1)
Depress the Battery Pack Release Button firmly first and
then slide the Battery Pack out from your tool.
TO INSTALL THE BATTERY PACK (SEE FIG B2)
Slide the fully charged Battery Pack onto the tool with
sufficient force until it clicks into position.
OPERATION
1. ON / OFF SWITCH (SEE FIG. C)
Depress the On/Off switch to start and release it to stop
your drill.
The on/off switch is fitted with a brake function which stops
your chuck immediately when you quickly release the switch.
It is also a variable speed switch that delivers higher speed
and torque with increased trigger pressure. Speed is
controlled by the amount of switch trigger depression.
WARNING: Do not operate for long periods at
low speed because excess heat will be produced
internally. When overload occurs, release the On/Off
switch immediately to avoid the motor overheating.
2. SWITCH LOCK (SEE FIG. C)
The switch trigger can be locked in the OFF position. This
helps to reduce the possibility of accidental starting when not
in use. To lock the switch trigger, place the rotation control in
the center position.
Fig.A
Fig.B1
Fig.B2
Fig.C
Fig.E
Fig.D2
Fig.D1
Fig.H
Fig.G
Fig.F