JLG X20JPLUS, Operator, Safety, Maintenance And Service Manual

Page: 68 / 206

66 Boom Lift Models X20JPLUS
INSTRUMENTS AND CONTROLS MUX20JP021602
tion, the operator uses the same remote control, removing it from its housing in
the basket and using the cable provided.
9.3.3. Emergency control position
There is a control position which will be identified as the emergency control po ‐
sition. This is located on the ground part of the machine, next to the distributor
for the aerial part. To enable it, press the special selector positioned on the base
of the turret until the green warning light comes on. The light indicates that the
movements of the aerial part are enabled.
From this position, the movements of the machine can be controlled directly
using the levers on the various hydraulic distributors, aerial part and proportio ‐
nal.
From this control position, the operator IS NOT enabled to control the aerial
part of the machine, but only the tracks, stabilisers and track extension fun ‐
ction.
When controlling the machine from the ground position, keep a di ‐
stance of at least 1 m from the tracks.
When controlling the machine from the ground position, always
make sure that the component that is being moved is completely vi ‐
sible and constantly check its trajectory.
Fig. 58 Selector Petrol/Diesel version Fig. 59 Selector Lithium version